Маршрутизатор Cisco CISCO2911/K9
Прямой импорт оборудованияиз Китая без посредников
Почему нет цен?
Уточнить цену
Гарантия до 5 лет
Диагностика перед отправкой
С нами выгодно и удобно!
- Поддержка персонального менеджера
- Возмещение НДС до 20%
- Онлайн-кабинет гарантийного сервиса
Как купить?
Раз, два и все делаРассчитаем стоимость
Присылайте спецификацию для подбора и расчета стоимости оборудования
Привезём и подключим
Подключим и настроим оборудование в вашем офисе или ЦОДе
Характеристики
Отсрочка платежа
В зависимости от суммы поставляемого товара можем предоставить отсрочку платежа на срок от 5 до 90 дней. Условия отсрочки платежа рассматриваются индивидуально. Подробную информацию уточняйте у вашего менеджера.
Первый платеж
Второй платеж
Первый платеж
Второй платеж
Первый платеж
Второй платеж
Описание
The Cisco 2911 router, supporting voice module, is designed for medium-sized branch.
Quick Specs
Figure 1 shows the product appearance of Cisco 2911/K9.
Table 1 shows the Quick Specs of the Cisco 2911/K9.
| Product Code | Cisco 2911/K9 |
| Rack Units | 2RU |
| Interfaces | 3 integrated 10/100/1000 Ethernet ports (RJ-45 only) |
| Expansion Slot(s) | 1 service module slot 1 Internal Service Module slot 2 onboard digital signal processor (DSP) slots 4 enhanced high-speed WAN interface card slots |
| RAM | 512 MB (installed) / 2 GB (max) |
| Flash Memory | 256 MB (installed) / 8 GB (max) |
| Dimensions | 43.8 cm x 30.5 cm x 8.9 cm |
| Package Weight | 16.15 Kg |
Product Details
Figure 2 shows the front panel of CISCO2911/K9.
Note:
? On/Off switch ? AC power connector ? Optional RPS adapter (blank panel shown) ? LEDs area
*The switch and power connector of the 2911 is on the front bezel, below the LEDs. Furthermore, this router provides an optional Redundant Power System (RPS) adapter.
Table 2 shows the LEDs area description
| LED | Color | Description |
| SYS | Solid green | Solid green indicates normal operation. |
| Blinking green | System is booting or is in ROM monitor mode. | |
| Amber | System error. | |
| Off | Power is off or system board is faulty. | |
| ACT | Green | Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port. |
| Off | No packet transfers are occurring. | |
| PoE | Green | PoE is available. |
| Amber | Power supply is not supplying PoE power. | |
| RPS | Green | System is running on external RPS power supply. |
| PS | Green | System is running. |
| Amber | System is not running. |
Figure 3 shows some LEDs on the back panel of the Cisco 2911 router.
Note:
? Compact flash 1 ? Compact flash 0 ? ISM ? PVDM3 1 ? PVDM3 0 ? EN (Enable USB console) ? EN (Enable Rj-45 console) ? S (Speed) ? L (Link)
Table 3 shows the description of these LEDs on the back panel.
| LED | Color | Description | Location |
| CompactFlash 1 | Green | Flash memory is busy. | Back Panel |
| Amber | Initialized with error. | ||
| Blinking Green then turns off | CompactFlash is ready for removal. | ||
| CompactFlash 0 | Green | Flash memory is busy. | Back Panel |
| Amber | Initialized with error. | ||
| Blinking Green then turns off | CompactFlash is ready for removal. | ||
| S (Speed) | 1 blink + pause | GE port operating at 10Mb/s. | Back Panel |
| 2 blink + pause | GE port operating at 100Mb/s. | ||
| 3 blink + pause | GE port operating at 1000 Mb/s. | ||
| L (Link) | Green | GE link is established. | Back Panel |
| Off | No GE link is established. | ||
| EN (RJ-45 console port) | Green | The RJ-45 console port is active. | Back Panel |
| EN (USB serial console port) | Green | The USB console port is active. | Back Panel |
| ISM | Green | Initialized. | Back Panel |
| Amber | Initialized with error. | ||
| Off | Not installed. | ||
| PVDM3 0, and 1 | Green | PVDM is initialized. | Back Panel |
| Amber | PVDM is detected but not initialized. | ||
| Off | No PVDM installed. |
Figure 4 show the expansion slots and ports on the back panel.
The Cisco 2911/K9 supports expansion functions with modules and cards.
Note:
? Compact flash 0 and 1 (0, right) ? EHWIC 0,1,2 and 3 (0, far right) ? USB serial port ? Console port ? AUX
? 10/100/1000 Ethernet port GE 0/1 and GE 0/2 (0/1, down) ? 10/100/1000 Ethernet port GE 0/0 ? USB 1 ? Ground connector ? USB 0
? AC or DC or AC-POE Power module ? Service module slot 1
Figure 5 shows the unboxing view of CISCO2911/K9.
Cards and Licenses
Table 4 shows some recommended models for this router.
| Cards | Description |
| Enhanced EtherSwitch Service Module, L2/L3 switching, 16* 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology | |
| Enhanced EtherSwitch Service Module, L2/L3 switching, 24 * 10/100/1000 GE ports, Enhanced POE, Cisco EnergyWise technology | |
| Cisco Voice/WAN Card VWIC3-2MFT-G703 | |
| 2-Port Serial WAN Interface Card Cisco Router High-Speed WAN Interface card | |
| Cisco 1900, 2900, 3900 Router EHWIC WAN Card EHWIC-1GE-SFP-CU | |
| Four port 10/100/1000 Base-TXGigabit Ethernet switch interface card for Cisco1900 2900 3900Routers | |
| Internal Services Module (ISM) with Services Ready Engine | |
| 16-channel high-density voice DSP module | |
| 256MB to 1GB Compact Flash Upgrade for Cisco 1900,2900,3900 | |
| 256MB to 2GB Compact Flash Upgrade for Cisco 1900,2900,3900 | |
| 256MB to 512MB CF Upgrade for Cisco 1900,2900,3900 ISR | |
| 256MB to 4GB Compact Flash Upgrade for Cisco 1900,2900,3900 | |
| 1GB USB Flash Token | |
| Licenses | Description |
| Cisco 2900 License L-SL-29-SEC-K9 Security E-Delivery PAK for Cisco 2901-2951 | |
| Cisco Application Experience License ISR 2900 Series - includes licenses for: AppX, DATA and WAASX | |
| Cisco 2900 License L-SL-29-SECNPE-K9 SEC No Payload Encryption E PAK for Cisco 2901-2951 | |
| Cisco 2900 License L-SL-29-UC-K9= Unified Communication E-Delivery PAK for Cisco 2901-2951 |
подбор оборудования
до 90 дней
