Модуль Cisco WS-X45-SUP7-E/2
Прямой импорт оборудованияиз Китая и ОАЭ без посредников
Почему нет цен?
Уточнить цену
Гарантия до 5 лет
Диагностика перед отправкой
С нами выгодно и удобно!
- Поддержка персонального менеджера
- Возмещение НДС до 20%
- Онлайн-кабинет гарантийного сервиса
Как купить?
Раз, два и все делаРассчитаем стоимость
Присылайте спецификацию для подбора и расчета стоимости оборудования
Привезём и подключим
Подключим и настроим оборудование в вашем офисе или ЦОДе
Характеристики
Отсрочка платежа
В зависимости от суммы поставляемого товара можем предоставить отсрочку платежа на срок от 5 до 90 дней. Условия отсрочки платежа рассматриваются индивидуально. Подробную информацию уточняйте у вашего менеджера.
Первый платеж
Второй платеж
Первый платеж
Второй платеж
Первый платеж
Второй платеж
Описание
Cisco Catalyst 4500E supervisor engine 7-E/2 is the redundant engine of supervisor 7-E for 4507R-E/4507R+E or 4510R-E/4510R+E. Supervisor 7-E/2 is the first Catalyst switch combines with Cisco IOS XE software, the feature enables In-Service-Software-Upgrade (ISSU) with less than 200 msec and Nonstop Forwarding/Stateful Switchover (NSF/SSO). The combination delivers continuous packet forwarding with no disruption of the communication during upgrade/downgrade the Cisco IOS software or supervisor engine switchover during the primary supervisor engine fails. In fact, the primary supervisor is active and response for normal system operation, the standby/secondary supervisor engine monitors the primary supervisor engine and fully synchronizes the information to allow immediate switchover in subsecond time when the primary fails. The resiliency features of the Cisco Catalyst 4500E prevent network outages that could result in lost business and revenue.
4500E Supervisor Engine 7-E/2 (Redundant engine of 4500E Supervisor Engine 7-E)
? Around 5 microseconds of latency to and from any 10 Gigabit Ethernet port
? Enables 10+ years of investment protection through backward and forward compatibility
? First Cisco Catalyst switch with 848 Gbps per system and 48 Gbps per slot
? Scalable routing (IPv4, IPv6, and multicast) tables, Layer 2 tables, and ACL and QoS entries to make sure of 8 queues per port and comprehensive security policies per port
? Network virtualization through Multi-VRF technology for Layer 3 segmentation
? Automation through Embedded Event Manager (EEM), Cisco Smart Call Home, AutoQoS, and Auto SmartPorts for fast provisioning, diagnosis, and reporting
? External USB and SD card support for flexible storage options
? Dynamic hardware forwarding-table allocations for ease of IPv4-to-IPv6 migration ? First Cisco Catalyst switch offering Cisco IOS® XE Software services
Quick Specs
Figure 1 shows the appearance of WS-X45-SUP7-E/2
Table 1 shows the Quick Specs.
| Feature and Description | WS-X45-SUP7-E/2 |
| Centralized switching capacity | 848 Gbps |
| Per-slot switching capacity | 48 Gbps |
| Throughput | ? 250 Mpps for IPv4 ? 125 Mpps for IPv6 ? 250 Mpps for L2 Bridging |
| IPv4 routing entries | 256,000 |
| IPv6 routing entries | 128,000 |
| Multicast routes | 16,000 (available with Cisco IOS XE 3.1.0 SG) 32,000 (Available with Cisco IOS XE 3.2.0 SG or later) |
| CPU | Dual core; 1.5 GHz |
| CPU queues | 64 |
| Synchronous dynamic RAM (SDRAM) | 2 GB upgradable to 4 GB |
| Nonvolatile RAM (NVRAM) | 1 GB |
| Security and QoS hardware entries | 128,000 |
| Cisco Network Admission Control (NAC) and Dynamic Host Configuration Protocol (DHCP) snooping entries | 12,000 |
| MAC addresses | 55,000 |
| Active VLANs | 4,094 |
| Address Resolution Protocol (ARP) entries | 47,000 |
| Spanning Tree Protocol instances | 10,000 |
| Switched virtual interfaces (SVIs) | 4,094 |
| Switched Port Analyzer (SPAN) | Maximum of 8 sessions: ingress or egress |
Get More Information
Do you have any question about the WS-X45-SUP7-E/2?
or sales@router-switch.com.
подбор оборудования
до 90 дней
