Модуль Cisco VS-S2T-10G
Почему нет цен?
Уточнить цену
Гарантия до 5 лет
Диагностика перед отправкой
С нами выгодно и удобно!
- Поддержка персонального менеджера
- Партнёрские скидки до 70%
- Онлайн-кабинет гарантийного сервиса
Как купить?
Раз, два и все делаРассчитаем стоимость
Присылайте спецификацию для подбора и расчета стоимости оборудования
Привезём и подключим
Подключим и настроим оборудование в вашем офисе или ЦОДе
Характеристики
Отсрочка платежа
В зависимости от суммы поставляемого товара можем предоставить отсрочку платежа на срок от 5 до 90 дней. Условия отсрочки платежа рассматриваются индивидуально. Подробную информацию уточняйте у вашего менеджера.
Первый платеж
Второй платеж
Первый платеж
Второй платеж
Первый платеж
Второй платеж
Описание
VS-S2T-10G is Cisco Catalyst 6500 Series Supervisor Engine 2T. The Supervisor Engine 2T is designed to deliver higher performance, better scalability, and enhanced hardware-enabled features. Supervisor Engine 2T integrates a high-performance 2-Terabit crossbar switch fabric that enables 80 Gbps switching capacity per slot on all Cisco Catalyst 6500 E-Series Chassis. This VS-S2T-10G is similar with the VS-S2T-10G=. The VS-S2T-10G= is a spare one.
Quick Specs
Figure 1 shows the appearance of VS-S2T-10G.
Table 1 shows the Quick Specs.
| Product Code | VS-S2T-10G |
| Chassis compatibility | Supported on all Catalyst 6500 E-series chassis and Catalyst 6807-XL chassis |
| Switch fabric | 2.08 Tbps Crossbar Switch Fabric with 26 Fabric Channels |
| Software compatibility | 12.2(50)SY |
| Uplink ports (PORT 1 through PORT 5) | ЈSupervisor Engine 2T has five uplink ports: ЈTwo 10GBASE-X ports |
| Console ports | One console port (RJ-45) |
| Compact Flash | 1GB |
| DRAM | 2GB for Lite and XL (4GB upgrade with 2GB memory upgrade (2+2) |
| NVRAM | 4 MB |
| switching capacity | up to 80 Gbps per slot of switching capacity on E-Series chassis |
| Routes | 256K(IPv4) 128K (IPv6) |
| Netflow entries | 512K |
| Layer-3 classification and marking access control entries (ACEs) | 64K shared for QOS / Security |
| Layer 2 rate limiters | 20 ingress/6 egress |
| Security ACL entries | 64K shared for QOS / Security |
| Power requirement (at 42 VDC) | 10.36 A |
| Dimensions (H x W x D) | 1.73 x 14.4 x 16.0 in. (4.4 x 36.6 x 40.6 cm). Occupies one slot in the chassis |
| Weight | 12.0 lb (5.44 kg) |
Product Details
Figure 2 shows the front panel of VS-S2T-10G.
Note:
| ? | PCMCIA slot |
| ? | 1000BASE-X UPLINK ports (requires SFP transceivers) |
| ? | MANAGEMENT port |
| ? | CONSOLE port |
| ? | 10GBASE-X UPLINK ports (requires X2 transceivers |
| ? | USB port |
| ? | Port currently not supported |
The Accessories
Table 2 shows the recommended elements for the VS-S2T-10G.
| Category | Model | Description |
| GLC Options
| 1000BASE-BX SFP, 1310NM | |
| 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM | ||
| X2 Module
| 10GBASE-LR X2 Module | |
| 10GBASE-ZR X2 Module |
Compare to Similar Items
Table 3 shows the comparison of VS-S2T-10G and VS-S2T-10G-XL.
| Product Code | VS-S2T-10G | |
| Chassis compatibility | E-Series only: Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, 6513E | E-Series only: Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, 6513E |
| Switch fabric | 2.08 Tbps Crossbar Switch Fabric with 26 Fabric Channels | 2.08 Tbps Crossbar Switch Fabric with 26 Fabric Channels |
| Uplink ports | Ј3 x GE SFP Ports Ј2 x 10G X2 Ports Ј1 x 10/100/1000 Management Port | Ј3 x GE SFP Ports Ј2 x 10G X2 Ports Ј1 x 10/100/1000 Management Port |
| Console ports | One console port (RJ-45) | One console port (RJ-45) |
| Compact Flash | 1GB | 1GB |
| DRAM | 2GB for Lite and XL (4GB upgrade with 2GB memory upgrade (2+2) | 2GB for Lite and XL (4GB upgrade with 2GB memory upgrade (2+2) |
| NVRAM | 4 MB | 4 MB |
| switching capacity | up to 80 Gbps per slot of switching capacity on E-Series chassis | up to 80 Gbps per slot of switching capacity on E-Series chassis |
| Routes | 256K(IPv4) 128K (IPv6) | 1024K (IPv4) 512K (IPv6) |
| Security ACL entries | 64K shared for QOS / Security | 256K shared for QOS/Security |
подбор оборудования
до 90 дней
